Proximity Sensor

Product Details:

We are highly engaged in offering the K14 Selet Capacitive Sensor across the pan India. We obligated to meet the quality standards as per the industry norms.

Product Details:

ATEX approved Capacitive proximity switches with sensing distance 12 mm nonflush mounted. 2-wire AC output with make (NO) and break (NC) switching. Grey Ø18 polyester housing with 2 m PVC cable. Ideal for detecting grain or solids as level indicator in tanks, silos or containers. Typical segments: agriculture, food & Beverage, conveyorbelts, plastic & rubber,

Product Details:

ICS08 series represents the optimal solution for industrial automation equipment in applications where space is limited, but long switching distance is needed,

Product Details:

We are the supplier, dealers, traders, Importers, exporters & distributors of Takex make Fiber Optic Sensor

Additional Information:

• Delivery Time: EX-STOCK

Product Details:

capacitive sensor can detect are all types of metal, all types of plastic, wood, paper, glass, and cloth. Capacitive sensors can also detect liquids like water, oil, and paint.

Product Details:

Carlo Gavazzi's patented Tripleshield™ capacitive sensors will detect most materials conductive and nonconductive.This makes them ideal for level detection in plastic and agricultural applications.

Product Details:

All purpose photoelectricsensors with universalhousing design and18 mm threaded barrelis an ideal replacementfor hundreds of other sensor styles.

Product Details:

Ideal for sensing, countingand checking of small metalparts such as: screws,washers, nuts etc. and thecontrol, detection, position,inspection and automation ofmachine tools &manufacturing systems.

Product Details:

A sensor that can be used undera severe use condition that heat,steam, and dust, etc. disperselike the ironworks and the heavyindustry site, etc..

Product Details:

In some work environments,extremely high sensing distances arerequired and essential for properoperation. Sensors from theoutstanding Performance Series offerthe absolute best-in-class sensingdistances.

Product Details:

Inductive ring-sensors from XECROcan be used to detect metal objects athigh velocity. With a maximum objectspeed of up to 45 m/s (147 ft/s), itallows the use of objects that are shotwith compressed air.

Product Details:

It is used in high temperatureapplications. Control precision ishigh, up to + / - 01 °C. Dual PIDcontrol can control the heating andcooling at the same time.

Product Details:

R/G/B Spectroscopy for Color Ratio Discrimination

• Ideal for LED color discrimination
• Supports pulse lighting LED light sources
• Output is changeable between NPN/PNP
• Teaching via remote operation is available

Product Details:

• Reliably detects double sheet or heated seal of plastic bags
  • Embedded amplifier with analog output
  • M18 threaded screw housing
  • Not affected by color or surface finish of the detecting object
  • Fast response time

Product Details:

• A multi-function sensor of excellent operability
  • NPN / PNP dual output
  • Simple teaching using a single button
  • Large easy-to-read display
  • Mutual interference prevention function
  • Two types of display options available

Product Details:

the LD30..PBR…IO Photoelectric Laser Sensors with IO-Link can detect clear materials without a reflector. Thanks to easy and complete customization of the sensors, these sensing principles (and more) can be adjusted based on customer needs. This flexibility within a single sensor reduces inventory while increasing accessibility on-hand for a variety of applications.

Product Details:

To ensure an adequate and lasting control of the shelters, designers must confront withthe problems arising from: The presence of dust or processing residues, need to ensurethe most hygienic food machinery, difficulty to maintain parity in the time members ofthe group security. Get best price of Safety Magnetic Sensors.

Our safety sensors simplify the control of the position of movableguards on operating machines, while maintaining the security: Provide an output signalwhen it enters their sensitive area the magnetic unit coded, which works as an actuator,and the only one able to operate them (protection against tampering), all withoutcontact and wear.

They can be mounted behind non-magnetic materials, maintainingthe distance of activation (increased hygiene on the machines and additional protectionagainst the neutralization).

Product Details:

Capacitive sensors are designed to withstand extreme heat. High-temperature tolerant capacitive sensors are especially suitable for applications where the sensor head is exposed to extreme temperatures, or comes directly into contact with hot materials.

Product Details:

Specifications

Product Details:

Non-powered Dupline® mag - net-operated proximity switch with built-in trans mit ter. Avail - a ble in Ø11 plastic housing or with M 14 metal thread. Monitoring of open doors and windows in build ing in stal la tions.

Product Details:

Non-powered Dupline® mag - net-operated proximity switch with built-in trans mit ter. Avail - a ble in Ø11 plastic housing or with M 14 metal thread. Monitoring of open doors and windows in build ing in stal la tions

Product Details:

Programming unit for Dupline® modules G..(..) .... Provides means of reading and programming of channel codes. Coding of I/O's as either 2, 4 and 8 successive channels or individually for each I/O. Unused inputs/outputs can be defined as non-coded.

Product Details:

The SHSUXXXX line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. 

Product Details:

The SHSUXXXXD line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The sensors have a LCD display for showing the measured values. By activating the touch button in the front the LED backlight is turned on and the signal type to be shown can be changed. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. The address assignment and the setup of the display operating mode are performed over the bus by using the SBWEB/SHWEB PC-based programming tool.

Product Details:

The SHSUXXXXD line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The sensors have a LCD display for showing the measured values. By activating the touch button in the front the LED backlight is turned on and the signal type to be shown can be changed. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. The address assignment and the setup of the display operating mode are performed over the bus by using the SBWEB/SHWEB PC-based programming tool.

Product Details:

The SHSUXXXXL line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The sensors have a “traffic light” LED which is used to indicate the CO2 level in green, amber or red colour. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. The address assignment and definition of CO2 threshold levels are performed over the bus by using the SBWEB/SHWEB PC-based programming tool.

Product Details:

The SHSUXXXX line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. 

Product Details:

The SHSUXXXXD line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The sensors have a LCD display for showing the measured values. By activating the touch button in the front the LED backlight is turned on and the signal type to be shown can be changed. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. The address assignment and the setup of the display operating mode are performed over the bus by using the SBWEB/SHWEB PC-based programming tool.

Product Details:

The SHSUXXXX line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly.

Product Details:

The SHSUXXXXD line are bus-powered room sensors for wall-mounting. They are available in different combinations of CO2, temperature and relative humidity. The sensors have a LCD display for showing the measured values. By activating the touch button in the front the LED backlight is turned on and the signal type to be shown can be changed. The only connection needed for the sensor is the Dupline® 2-wire cable. Several sensors can be multi-dropped via the same Dupline® 2-wire bus, thereby simplifying the wiring to the controller significantly. The address assignment and the setup of the display operating mode are performed over the bus by using the SBWEB/SHWEB PC-based programming tool.

Product Details:

The MC36C series are encoded safety magnetic sensors with compact housing used to monitor the position of hinged, sliding or removable guards of industrial applications. Carlo Gavazzi safety sensors stop or disconnect the dangerous motions, if the mobile protections are opened or displaced. They are suitable for safety gates applications up to safety category 4, PLe according to EN ISO 13849-1 with suitable logic safety module. MC36C sensors are the right answer in harsh industrial environments with damp and dusty condition.

Product Details:

The MC88C series are encoded safety magnetic sensors with rectangular housing used to monitor the position of hinged, sliding or removable guards of industrial applications. Carlo Gavazzi safety sensors stop or disconnect the dangerous motions, if the mobile protections are opened or displaced. They are suitable for safety gates applications up to safety category 4, PLe according to EN ISO 13849-1 with suitable logic safety module. MC88C sensors are the right answer in harsh industrial environments with damp and dusty condition.

Product Details:

The MC88C series are encoded safety magnetic sensors with rectangular housing used to monitor the position of hinged, sliding or removable guards of industrial applications. Carlo Gavazzi safety sensors stop or disconnect the dangerous motions, if the mobile protections are opened or displaced. They are suitable for safety gates applications up to safety category 4, PLe according to EN ISO 13849-1 with suitable logic safety module. MC88C sensors are the right answer in harsh industrial environments with damp and dusty condition.

Product Details:

Multiple colored LED indicators, with self-blinking capabilities and IO-Link®, are made for different applications.
Field mounted ones indicate a process status from larger distances, from behind a protection fence for example.
Panel mount indicators have four different stainless -also food grade- bezels to choose from.

• Panel mount indicators use the same housings as the unique push and touch buttons from XECRO. They fit into ⌀ 22.5 mm mounting standard holes
• Field mount indicators in M18 and M30
• Bright optical multi-color status indication
• Available with synchronization feature
• Available with 3V3 tolerant low current control inputs
• Arbitrary access to all features by IO-Link®

Product Details:

Magnetic Sensors are used fordetecting proximity. Special codedmagnets and sensors are availablefor use in safety applications.Magnetic sensors are frequentlyused in elevators and lifts, gatecontrol, level detection and accesscontrol.

Product Details:

The CMD (Cold Metal Detector) is composedof the transmitter and receiver. It is used evenif the object temperature is high and understrong external light. Application:Steel/Ceramic Furnace

Product Details:

Ideal for chemical tanks in pharmaceutical plants, blending tank of liquid material for Drinks, or other applications requiring high accuracy.

Product Details:

Ideal for fuel tanks of hydraulic unit or boiler single unit controls both high and low limits Latching relay available.

Product Details:

The AJL jaw series is addressed to an easy mounting of the M12 sensors on the lift car roof by a specific support. The sensor can be inserted in the ASD support and positioned along the jaw; then it can be adjusted Product Description along the support hole and fixed by a screw on the top of the support. The plastoferrite magnets AML for monostable and bistable sensors are the suitable units for the sensor activation, also for elevated lengths.