Banna Tech Electronic Instruments

Product Details:

A sputtering film measuring component is used for pressure measuring,Pressure induced strain increase the value of the radial resistors and the decrease the value of the resistors.Transverse to the radius.

Other Detail:

• High pressure,High Temperature
• High stability and reliability
• Vibration proof corrosion proof

Product Details:

P300N is able to communicate with control system or hand held commmunicator for configuration,monitoring,testing etc Digital signal 4-20mA analog output,the frequency signal has no interference to 4-20mA

• High accuracy,high realibility and high stability
• Zero and span can be calibrated on-site
• Equipped with HART protocol by default 
• Damping adjustable

Product Details:

TP10 equips a PT100 probe the resistance of which changes upon temperature changing Available model 2-wire,3-wire,4-wire Applicable to both gas and liquids

Other Detail:

• Easy to install
• Multiple measuring range selectable
• Variouis probes selectable
• Stainless steel housing rugged compact design
• Be able to work with other meters and controls

Product Details:

This Electromagnetic Flow Meter has no mechanical inertia, quick response and good stability, application in automatic examination, and regulation and controlling. It is used to measure flow of any kind of conductive liquid and our product range also includes process control instruments and electronic process control instruments. This range of Flow Meter operates data for safe and firm protection of memory. These are used for measuring accuracy is uninfluenced by the physical parameters such as type, temperature, viscosity, density and pressure.

Product Details:

FP10N Piston Flow Switch equips a spring supported magnetic piston,the flowing medium pushes the piston travelling,which will trigger the micro switch or reed switch.It can be used for both liquid and gas.

Other Detail:

• Lower Pressure Drop
• Good repeatability
• Totally seperated electrical parts and mechanical parts
• Low cost good for low flow rate

Product Details:

FT11N Thermal Flow Switch is based on two temperature sensord which are positioned within the medium.The unheated sensor registers the liquid Temp.the other sensor heated a few degree.When the medium flows,the heat generated in the sensor is conducted away by the medium 

Other Detail:

• No moving parts-no maintenance is needed
• One single model is good for multiple pipe size
• Compact design

Product Details:

PE500 employs ceramic thin film pressure sensor to measure pressure.High accuracy,integrated LEd display for pressure display and parameter set

Other Detail:

• 330 deg rotatable indicator
• Measuring range-1--250 bar
• Digital LED for pressure and switching set display
• High reliability Accuracy-0.5%
• Output diplay directly
• Switching output and analog output

Product Details:

P400 series diffrential pressure transmitter is designed to measure pressure for liquid,gas or steam.Complete sealing capacitance sensing components make the unit very stable and reliable while has high measuring accuracy.communicating with control system or handheld communicator by the standard equiped HART protocol,through which thebsettings,configuration,monitoring and testing could be done easily

Other Detail:

• High accuracy,high realibility and stability
• Zero and span programmable on-site
• Standard equipped HART protocol
• Wetted parts

Product Details:

T15 equips with dual metal sheets.When switching point is reached,results from thermal expansion the expanded metal sheets activates the micro switch.

Other Detail:

• Wetted parts material:brass
• Connecting thread
• Temperature range 30 deg cel,120 deg cel

Product Details:

P36H equips with spring supported piston diaphrag,the changing pushes it travelling,which will trigger the mechanical devices to send out switching signal as calibrated pressure is reached

Other Detail:

• Rugged Design
• Ideally suitable for harsh application
• Switching point adjustable
• Fixed or adjustable hysteresis selectable
• High repeatability NC/NO Programmable

Product Details:

P10 equips with spring supported piston,the changing pressure pushes the piston,which will trigger the mechanical devices to send out switching signal calibrated pressure is reached.

Product Details:

A diverse array of sensors are used to measure temperature by sensing some change in a physical characteristic. with a wide variety of temperature measurement devices, whether you are measuring temperature in a lab or rugged remote location, Banna has the right measurement devices for your application.

Product Details:

The Pressure Transmitter enclosure are the process connection fabricated using stainless steel. These are available with sturdy stainless steel housing using LED display. The Pressure Transmitter manufactured by us is ideal for measuring liquid and gas pressure. The Digital Display is available either radically or axially to the process connection. Pressure Transmitters are used for measuring the pressure of liquids, gases and vapor. The compactly designed product range can be availed with display or without display.

Product Details:

P55N equips with a spring supported diaphragm,the changing pressure pushes diaphragm travelling,which will trigger the mechanical devices to send out switching signal as calibrated pressure is reached .

Other Detail:

• Compact Design
• DIN Plug
• Good for low pressure(0.03--1.2 Bar)
• High repeatability,NC/NO Pragrammable
• Gold plated spring contacts

Product Details:

P3DH equips with a spring supported piston diaphragm the changing pressure pushes the diapragm travelling,which will trigger the mechanic devices to send out switching signal as calibrated pressure is reached

>5--250 Bar
>Rugged Design
>Switching Point adjustable
>Fixed or adjustable switching selectable
>High repeatability
>NC/NO Programmable

Product Details:

Vortex Flow meter Typical Application: Superheated steam, saturated steam and regular fluid volume flow rate or weight flow rate measuring;cooling tower,water condensate,municipal water treatment and distribution and boiled feed water;chemical processing,pool water park

Other Detail:

• The frequency of pulse output is proportional to flow rate, no zero drift,very stable performance
• High measuring accuracy 0% for liquid 5% for gas 
• Sensing parts are noncontact to medium-means high               
• Realibility,simple structure,easy to install,low maintenance cost
• Applicable to gas,steam,liquid

Product Details:

TT10 equips with a thermocouple probe,the measuring is based on the principle that when two dissimilar metals are joined a predictable voltage will be generated that relates to the difference in temperature between the measuring junction and the reference junction

Other Detail:

• Easy to install
• Multiple measuring range selectable
• Various probes selectable to meet different application requirements

Additional Information:

• Item Code: TT10Series

Product Details:

FZ10 is ideal flow meter viscous medium measuring.It operates by repeatedly filling and empting liquid in/from a known volume compartments.

Other Detail:

• Independant to medium viscosity
• Compact design less weight
• No limit to mounting position
• Output NPN/PNP selectable

Product Details:

We supply and export a wide range of Oval Gear Flow Meters to our clients across the globe. They are available in various specifications as per the requirements of the clients. This oval gear flow meter is used to measure oils and high viscosity liquids for their accuracy of flowing. These are made as per the latest technologies and are procured from the trusted dealers in the industry.

Product Details:

These FR12D Turbine Flow Meter is used to check the rate of flow of the liquids, gases etc. These meters are available in various specifications and are widely appreciated by our clients for their utility in various industrial applications. These meters are procured from the certified dealers in the market who use best quality materials for manufacturing. We distribute these meters that are made according to international quality standards.

Product Details:

This P365M Rugged Pressure Switch  is appreciated for their precise designing. The set points of these switches are resistant to temperature. These are sturdy, robust and precise devices, for use in process industries. Rugged pressure switch are designed by our engineers for harsh applications, they can be classified according to different measuring range requirement. The units can also be used as pressure or vacuum switches by connection up only one of the pressure connections. Our clients can avail these switches for controlling the pressure at different levels.

Product Details:

Based on the angular velocity of the rotor is proportional to the fluid flow rate, the metal rotor equipped FR12D converts the rotor velocity to a pulse and obtains the flow rate. It is used widely for flow rate alerting. instantaneous flow rate and total flow rate display. Typical applications: liquid delivery system, filtering system, pump run-dry protection, applicable to water and oil with viscosity close to water.

Product Details:

Banna Pressure Switch is a form of switch that closes an electrical contact when a certain set pressure has been reached on its input. The switch may be designed to make contact either on pressure rise or on pressure fall.