New Items

Product Details:

DuplineSafe relay output module approved according to IEC/EN 61508-SIL3, IEC/ EN 62061-SIL3 and ISO/EN 13849-1 PL e by TÜV. The module monitors up to 63 DuplineSafe input modules, type number GS751021xx. The NO relay contacts are only in the closed position if a valid “safe state” signal is received from all the Safety Input modules being monitored. The module can be configured to operate with automatic or manual restart after the safety relays have been released. A non-safe status output is available for connection to external equipment, e.g. a PLC. The Module must be configured prior to installation by means of the DuplineSafe configuration unit GS73800080.

Product Details:

he BDA-RE13A-U is a module with a single relay output. It is part of the smarthouse concept and can be used with all the functions supported by the smarthouse controller. When an activation command is received from the Dupline® bus, the output turns ON and remains ON until an OFF command is received.

Product Details:

This is a four-solid-staterelay output module for DIN mounting. The outputs are normally OFF. When an activation command is received from the Dupline® bus, the output turns ON and remains ON until the OFF command is received. Thanks to the internal bus, the SH2SSTRI424 modules can be connected one next to the other without the need for wiring the Dupline® bus.

Product Details:

The SHE5XP150 is a 150° PIR sensor to detect presence and/or movement in indoor installations. It is part of the smart-house concept and can be used to control lights, rollerblinds, air-conditioning, intruder alarms and all the other functions supported by the smart-house system, in an automatic way depending on people-presence. This sensor is completely programmable via the SH tool.

Product Details:

Dupline® receiver. SPDT relay outputs for control of 1or 2 loads of up to 250 VAC/10 A or SPST relay outputs for control of 4 loads of up to 250 VAC/5 A

Product Details:

Dupline® receiver. SPDT relay outputs for control of 1or 2 loads of up to 250 VAC/10 A or SPST relay outputs for control of 4 loads of up to 250 VAC/5 A

Product Details:

Dupline receiver®designed to be a part of the Dupline® concept for Building Automation. SPST relay outputs or control of 8 loads of up to 250 VAC/16 A.

Product Details:

Dupline® receiver. SPDT relay outputs for control of 1or 2 loads of up to 250 VAC/10 A or SPST relay outputs for control of 4 loads of up to 250 VAC/5 A.

Product Details:

Dupline receiver®designed to be a part of the Dupline® concept for Building Automation. SPST relay outputs for control of 4 loads of up to 250 VAC/16 A

Product Details:

The Dupline® decentral receiver has a build-in SPST relay for control of a load of up to 13 A/250 VAC. The module is especially designed for the use in building automation applications where it allows a flexible installation concept featuring a separate power and signal (control) bus. The compact size of the module makes it possible to fit it in a junction box or directly behind a power outlet.

Product Details:

We are the supplier, dealers, traders, Importers, exporters & distributors of Carlo Gavazzi make Fibre Optic Amplifier. 

Additional Information:

• Delivery Time: EX-STOCK

Product Details:

An electronic sensor called a capacitive sensor may detect solid or liquid targets without coming into touch with them. Capacitive sensors emit an electrical field from its detecting end in order to detect these targets. A capacitive sensor is capable of detecting any object that can interfere with this electrical field.

Product Details:

These Soft Starters featuresinternal bypass relays whicheliminate the need for largeexternal heatsinks. This minimizesthe space requirements in yourpanel also greatly reduces theheat generated. Applicationsinclude conveyor systems, pumps,compressors,industrial dryers,automatic doors, palletizers andfans.

Product Details:

These Digital Panel Metersallow for measuring anddisplay of virtually any processvariable including:Temperature, Amperage,Voltage, Pressure, RPM andResistance.

Product Details:

To meet all your engine related heating needs, HOTSTART offers a variety of products such as temperature controls, magnetic contactors, junction boxes, wiring harnesses, power cords, and complete control systems to ensure proper and efficient performance of HOTSTART coolant and lube oil heaters.

General purpose, weathertight and hazardous location thermostats are available for all engine and oil heating applications. Choose between fixed temperature settings and adjustable thermostats. Regardless of ambient temperature, HOTSTART thermostats will ensure efficient performance of your coolant and lube oil heaters.

Product Details:

Plastic flange (PP, PVC, CPVC) versions for waste water or liquid tanks Metallic Flange (304,316SS) versions for pure water applications.

Product Details:

 (OPENING SENSOR FORALL TYPES OF AUTOMATICDOORS)The EAGLE is a microwave sensorwhich can be mounted on all typesof automatic doors, irrespective ofthe surroundings. Configuration ofparameters is flexible and easy viathe remote control or push buttons.

Product Details:

Product Details:

Product Details:

CERTUS is the new Carlo Gavazzi modular configurable safety system. This new safety device is capable of monitoring several safety photocells, emergency stops, safety mats, magnetic or mechanical switches, twohand controls etc. Thanks to the new CERTUS modular structure, it is possible to adapt its I/O configuration and functionality to the demands of many different applications; making CERTUS a highly versatile and flexible safety system.

Product Details:

Equipped with high-capacity sensor power supply Sensor controller specifically designed for sensor input

Product Details:

High reliable detection performance with a simple and compact design.

• BrandTakex
• Weight90g
• Model NumberPA-460EA
• Ambient Temperature-15 DegreeC to + 55 DegreeC
• Supply Voltage7 to 28V DC

Product Details:

• Digital display of light intensity on dual screen
• Covers low to high temperatures
• Employs the highly reliable Bestact relay

Product Details:

• Remote fine adjustment of the laser line position is possible, making it easy to align the isocenter during pre-work inspections.
• The position memory/return function allows you to return to the memorized position even if the settings are incorrect.
• The handy remote control allows you to adjust the laser pattern position in a total of 5 axes: linear x 2 axes, tilt x 2 axes, and rotation x 1 axis.
• 3-point irradiation position memory and return movement are possible.
• Fine adjustments can be made to 10 units individually with one handy remote control.
• Long pattern distance/line length ratio 1:1 (e.g. line length 2.5m/projection distance 2.5m).

Product Details:

• MaterialABS
• Operating temperature35% - 85% RH
• Sensing DistanceDiffuse Reflection
• BrandRiko
• Light EmitterRed laser 650 nm

Product Details:

• BrandRiko
• Operating Temperature-55 DegreeC~+70 DegreeC
• Model NumberPRC420
• Sensing Distance40mm
• Light Angle60 Degree

Product Details:

• MaterialPlastic
• Operating temperature-10DegreeC ~ 55DegreeC
• Weight65g
• Protection DegreeIP64
• Detection Distance7mm

Product Details:

We are the supplier, dealers, traders, Importers, exporters & distributors of Panasonic make industrial devices.

Product Details:

The Master channel generator GS33900000800A provides the channel generator output drive for one Dupline® network. Up to 7 Master Channel Generators can be connected to one profinet gateway GS33910060 800 By using the dip switches on the front, the user can select ID addresses and change between the different modes explained below in the datasheet. The GS33900000800A supports standard Dupline® addresses and can operate with analink, mux BCD Analog, Dupline® Safe, 8 bit and has extended digital output mode for profinet.

Product Details:

They are developed in order to be used for following operations: For monitoring and protection of industrial machines, without inertia, in which down-time is less than access time to the dangerous area. Use on sliding or pivoting protectors (covers, cases, doors, grids, etc.). To protect operators working on dangerous machines, by opening the control circuit. Withdrawal of key by opening the mobile protector, causes immediate stopping of the machine drive. Specific limit switches ideal for monitoring and protection of light industrial machines without inertia, equipped with angular movement protectors (doors, hinges, rotative covers, grid, etc.). Detection by the rotative axis or by means of a lever. Opening of the mobile protector guarantees operator protection by immediately stopping the machine drive. To control the access point of the hazardous area

Product Details:

They are developed in order to be used for following operations: For monitoring and protection of industrial machines, without inertia, in which down-time is less than access time to the dangerous area. Use on sliding or pivoting protectors (covers, cases, doors, grids, etc.). To protect operators working on dangerous machines, by opening the control circuit. Withdrawal of key by opening the mobile protector, causes immediate stopping of the machine drive. Specific limit switches ideal for monitoring and protection of light industrial machines without inertia, equipped with angular movement protectors (doors, hinges, rotative covers, grid, etc.). Detection by the rotative axis or by means of a lever. Opening of the mobile protector guarantees operator protection by immediately stopping the machine drive. To control the access point of the hazardous area

Product Details:

They are developed in order to be used for following operations: For monitoring and protection of industrial machines, without inertia, in which down-time is less than access time to the dangerous area. Use on sliding or pivoting protectors (covers, cases, doors, grids, etc.). To protect operators working on dangerous machines, by opening the control circuit. Withdrawal of key by opening the mobile protector, causes immediate stopping of the machine drive. Specific limit switches ideal for monitoring and protection of light industrial machines without inertia, equipped with angular movement protectors (doors, hinges, rotative covers, grid, etc.). Detection by the rotative axis or by means of a lever. Opening of the mobile protector guarantees operator protection by immediately stopping the machine drive. To control the access point of the hazardous area.

Product Details:

They are developed in order to be used for following operations: For monitoring and protection of industrial machines, without inertia, in which down-time is less than access time to the dangerous area. Use on sliding or pivoting protectors (covers, cases, doors, grids, etc.). To protect operators working on dangerous machines, by opening the control circuit. Withdrawal of key by opening the mobile protector, causes immediate stopping of the machine drive. Specific limit switches ideal for monitoring and protection of light industrial machines without inertia, equipped with angular movement protectors (doors, hinges, rotative covers, grid, etc.). Detection by the rotative axis or by means of a lever. Opening of the mobile protector guarantees operator protection by immediately stopping the machine drive. To control the access point of the hazardous area

Product Details:

They are developed in order to be used for following operations: For monitoring and protection of industrial machines, without inertia, in which down-time is less than access time to the dangerous area. Use on sliding or pivoting protectors (covers, cases, doors, grids, etc.). To protect operators working on dangerous machines, by opening the control circuit. Withdrawal of key by opening the mobile protector, causes immediate stopping of the machine drive. Specific limit switches ideal for monitoring and protection of light industrial machines without inertia, equipped with angular movement protectors (doors, hinges, rotative covers, grid, etc.). Detection by the rotative axis or by means of a lever. Opening of the mobile protector guarantees operator protection by immediately stopping the machine drive. To control the access point of the hazardous area.

Product Details:

They are developed in order to be used for following operations: For monitoring and protection of industrial machines, without inertia, in which down-time is less than access time to the dangerous area. Use on sliding or pivoting protectors (covers, cases, doors, grids, etc.). To protect operators working on dangerous machines, by opening the control circuit. Withdrawal of key by opening the mobile protector, causes immediate stopping of the machine drive. Specific limit switches ideal for monitoring and protection of light industrial machines without inertia, equipped with angular movement protectors (doors, hinges, rotative covers, grid, etc.). Detection by the rotative axis or by means of a lever. Opening of the mobile protector guarantees operator protection by immediately stopping the machine drive. To control the access point of the hazardous area

Product Details:

They are developed in order to be used for following operations: For monitoring and protection of industrial machines, without inertia, in which down-time is less than access time to the dangerous area. Use on sliding or pivoting protectors (covers, cases, doors, grids, etc.). To protect operators working on dangerous machines, by opening the control circuit. Withdrawal of key by opening the mobile protector, causes immediate stopping of the machine drive. Specific limit switches ideal for monitoring and protection of light industrial machines without inertia, equipped with angular movement protectors (doors, hinges, rotative covers, grid, etc.). Detection by the rotative axis or by means of a lever. Opening of the mobile protector guarantees operator protection by immediately stopping the machine drive. To control the access point of the hazardous area

Product Details:

They are developed in order to be used for following operations: For monitoring and protection of industrial machines, without inertia, in which down-time is less than access time to the dangerous area. Use on sliding or pivoting protectors (covers, cases, doors, grids, etc.). To protect operators working on dangerous machines, by opening the control circuit. Withdrawal of key by opening the mobile protector, causes immediate stopping of the machine drive. Specific limit switches ideal for monitoring and protection of light industrial machines without inertia, equipped with angular movement protectors (doors, hinges, rotative covers, grid, etc.). Detection by the rotative axis or by means of a lever. Opening of the mobile protector guarantees operator protection by immediately stopping the machine drive. To control the access point of the hazardous area.

Product Details:

They are developed in order to be used for following operations: For monitoring and protection of industrial machines, without inertia, in which down-time is less than access time to the dangerous area. Use on sliding or pivoting protectors (covers, cases, doors, grids, etc.). To protect operators working on dangerous machines, by opening the control circuit. Withdrawal of key by opening the mobile protector, causes immediate stopping of the machine drive. Specific limit switches ideal for monitoring and protection of light industrial machines without inertia, equipped with angular movement protectors (doors, hinges, rotative covers, grid, etc.). Detection by the rotative axis or by means of a lever. Opening of the mobile protector guarantees operator protection by immediately stopping the machine drive. To control the access point of the hazardous area

Product Details:

Bus-powered safety input module approved according to IEC/EN 61508-SIL3, IEC/EN 62061-SIL3 and ISO/EN 13849-1 PL e by TÜV. The module has a single input for potential-free contacts, and it uses two Dupline® channels for sending the safety signal. The small dimension IP67 housing makes it suitable for decentral installation, e.g. inside a pull-cord switch. The module is always used in conjunction with the DuplineSafe Safety Relay GS 38300143230. The “safe state” signal is transmitted continuously to the Safety Relay as long as the input contacts are closed and the module self-check is OK. The Dupline® module is delivered with a 8 pin male multi connector.

Product Details:

Bus-powered safety input module approved according to cUL, IEC/EN 61508- SIL3, IEC/EN 62061-SIL3 and ISO/EN 13849-1 PL e by TÜV. The module has a single input for potential-free contacts, and it uses two Dupline® channels for sending the safety signal. The small dimension IP67 housing makes it suitable for de-central installation, e.g. inside a pull-cord switch. The module is always used in conjunction with the DuplineSafe Safety Relay GS 38300143230. The “safe state” signal is transmitted continuously to the Safety Relay as long as the input contacts are closed and the module self-check is OK. The Dupline® module is delivered with a 8 pin male multi connector.